Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Technical characteristics
   2.2. Schedule of maintenance of Ford Probe, Mazdas 626 and MX-6
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of steering
   2.7. Check of level of automatic transmission liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Check of seat belts
   2.10. Survey and replacement of brushes of screen wipers
   2.11. Check, maintenance and accumulator charging
   2.12. Check, adjustment of a tension and replacement of a driving belt
   2.13. Check and replacement of hoses in a motive compartment
   2.14. Check of the cooling system
   2.15. Shift of wheels
   2.16. Check of the brake system
   2.17. Check of level of oil of the mechanical transmission
   2.18. Replacement of the air filter
   2.19. Check and replacement of spark plugs
   2.20. Check and replacement of elements of system of ignition
   2.21. Check and replacement of the valve of ventilation of a case
   2.22. Check and adjustment of speed of idling (model till 1997)
   2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997)
   2.24. Replacement of cooling liquid and washing of the cooling system
   2.25. Replacement of brake fluid
   2.26. Check of steering and suspension bracket
   2.27. Automatic transmission liquid replacement
   2.28. Replacement of oil of the mechanical transmission
   2.29. Check of the exhaust system
   2.30. Check of a power supply system
   2.31. Check and adjustment of gaps of valves (model of 1998 of release)
   2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



2.24. Replacement of cooling liquid and washing of the cooling system

GENERAL INFORMATION

When the cooling system gets littered, and cooling liquid gains rusty color, it is necessary to replace and wash out it the cooling system.

Discharge of cooling liquid

PERFORMANCE ORDER
1. Remove a cap of a radiator, a nadaviva on a cap of a radiator and having turned it counterclockwise, and a cap of a jellied mouth depending on model. Remove a cap of a broad tank.
2. Open the drain cap located in the lower part of a radiator and merge cooling liquid from a radiator. Disconnect the lower hose of a radiator and merge cooling liquid from the engine. If cooling liquid has rusty color, the cooling system needs to be washed out.

Washing of the cooling system

PERFORMANCE ORDER
1. Remove the thermostat.
2. Connect the lower hose of a radiator into place. Transfer the handle of adjustment of temperature in salon to the provision of "HOT" for washing of a heater of an oven together with the cooling system.
3. Disconnect the top hose of a radiator and wash out a radiator clear flowing water or special cleaner. If the radiator is strongly littered, remove a radiator and address experts for its washing and / or repair.

Gulf of cooling liquid

PERFORMANCE ORDER
1. Install the thermostat into place and connect cooling system hoses.
2. Fill in cooling liquid in a tank of cooling liquid.