Mazda 626

1991-1998 of release

Repair and operation of the car

Mazda 626

+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Technical characteristics
   2.2. Schedule of maintenance of Ford Probe, Mazdas 626 and MX-6
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of steering
   2.7. Check of level of automatic transmission liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Check of seat belts
   2.10. Survey and replacement of brushes of screen wipers
   2.11. Check, maintenance and accumulator charging
   2.12. Check, adjustment of a tension and replacement of a driving belt
   2.13. Check and replacement of hoses in a motive compartment
   2.14. Check of the cooling system
   2.15. Shift of wheels
   2.16. Check of the brake system
   2.17. Check of level of oil of the mechanical transmission
   2.18. Replacement of the air filter
   2.19. Check and replacement of spark plugs
   2.20. Check and replacement of elements of system of ignition
   2.21. Check and replacement of the valve of ventilation of a case
   2.22. Check and adjustment of speed of idling (model till 1997)
   2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997)
   2.24. Replacement of cooling liquid and washing of the cooling system
   2.25. Replacement of brake fluid
   2.26. Check of steering and suspension bracket
   2.27. Automatic transmission liquid replacement
   2.28. Replacement of oil of the mechanical transmission
   2.29. Check of the exhaust system
   2.30. Check of a power supply system
   2.31. Check and adjustment of gaps of valves (model of 1998 of release)
   2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


2.20. Check and replacement of elements of system of ignition

Wires of high voltage

1. Examine wires of high voltage on existence of traces from sparks at the working engine.
2. Disconnect wires from spark plugs, undertake only a wire cover. Examine contacts a wire, clear contacts of corrosion or replace wires.
3. Connect wires to spark plugs.
4. Wipe wires of high voltage on all length and examine wires on existence of damages or wear.
5. Disconnect wires from the distributor or the coil of ignition. Check a condition of contacts.

Cover of the distributor of ignition and runner

1. Turn off fixing screws and uncover the ignition distributor.
2. Examine a cover on existence of cracks (1), traces from sparks (2), the broken-off sites (3) and other damages.
3. Examine an ignition distributor cover from the inside on existence of traces from sparks (1). Check whether plugs (3) are erased and whether the piece of coal is damaged (2).
4. Remove the runner and examine it on existence of cracks (3), corrosion (2) and other damages. Check whether the spring is weakened (1). Replace a cover and the runner if it is necessary.
5. Check resistance of contacts between wires of high voltage and a cover.

Ignition coil

Examine the coil on existence of cracks, damages and traces from sparks.

On the homepage