Mazda 626

1991-1998 of release

Repair and operation of the car


Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
- 10. Running gear
   10.1. Introduction
   10.2. Technical characteristics
   + 10.3. Suspension brackets
   + 10.4. Steering
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



10. Running gear

10.1. Introduction
GENERAL INFORMATION

The forward suspension bracket is completely independent and uses MacPherson racks. The stabilizer of cross stability is installed on all models.

Elements of a forward suspension bracket and steering

  
1. Steering mechanism
2. Suspension bracket lever
3. Sharovy hinge 		4. Nave arm
5. Suspension bracket rack
6. Guard

The back suspension bracket also uses racks of MacPherson and includes cross and longitudinal levers of a suspension bracket.

Elements of a back suspension bracket (bottom view)

  
1. Suspension bracket rack
2. Back cross lever
3. Nave arm
4. Longitudinal lever 		5. Forward cross lever
6. Cross-piece
7. Stabilizer of cross stability

On all models the stabilizer of cross stability of a back suspension bracket is also installed.

Elements of a back suspension bracket (rear view)

  
1. Suspension bracket rack
2. Connecting draft of the stabilizer of cross stability
3. Cross-piece
4. Adjusting cam 		5. Stabilizer of cross stability
6. Back cross lever
7. Forward cross lever
8. Nave arm
9. Longitudinal lever

The rack steering mechanism is located behind the engine / transmission and fastens to a suspension bracket cross-piece. The system of hydrostrengthening of steering consists of the steering mechanism, the pump and connecting tubes and hoses.