Mazda 626

1991-1998 of release

Repair and operation of the car

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
- 10. Running gear
   10.1. Introduction
   10.2. Technical characteristics
   - 10.3. Suspension brackets
      - 10.3.1. Rack of a forward suspension bracket Replacement of elements of a rack of a suspension bracket Nave arm Nave and hug bearing of a forward wheel Stabilizer of cross stability of a forward suspension bracket Suspension bracket lever Replacement of spherical hinges
      + 10.3.2. Rack of a back suspension bracket
      10.3.3. Size of tires
      10.3.4. Angles of installation of wheels
   + 10.4. Steering
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


10.3. Suspension brackets

10.3.1. Rack of a forward suspension bracket


1. Remove a wheel.
2. Remove a brake hose from an arm on a suspension bracket rack. Remove an ABS sensor wire.
3. Turn off fixing nuts of an arm of a nave and remove fixing bolts.
4. Remove a nave arm from a rack.
5. Mark the provision of installation of a rack, turn off fixing nuts and remove a rack.


1. Examine a rack on existence of traces of leak, dents, cracks or others
2. Examine shock-absorbers on existence of cracks or damages. Check
condition of saddles of a spring.


Installation is carried out upside-down removals.

On the homepage