|
1. Remove a heel-tap from a nut of fastening of a nave. |
|
2. Turn off a nut of fastening of a nave. |
| 3. Lift the car and install it on support. Remove a wheel. |
4. Remove a brake support, a fixing arm of a support and brake
disk. |
|
5. Remove the ABS wheel sensor if it is necessary. |
| 6. Turn off fixing nuts of an arm of a nave. |
| 7. Disconnect steering draft from the nave arm lever. |
| 8. Disconnect the spherical hinge from a nave arm. |
| 9. Get a half shaft from a nave. |
| 10. Remove fixing bolts and remove a nave arm. |
