Mazda 626

1991-1998 of release

Repair and operation of the car

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
- 10. Running gear
   10.1. Introduction
   10.2. Technical characteristics
   - 10.3. Suspension brackets
      - 10.3.1. Rack of a forward suspension bracket
         10.3.1.1. Replacement of elements of a rack of a suspension bracket
         10.3.1.2. Nave arm
         10.3.1.3. Nave and hug bearing of a forward wheel
         10.3.1.4. Stabilizer of cross stability of a forward suspension bracket
         10.3.1.5. Suspension bracket lever
         10.3.1.6. Replacement of spherical hinges
      + 10.3.2. Rack of a back suspension bracket
      10.3.3. Size of tires
      10.3.4. Angles of installation of wheels
   + 10.4. Steering
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips

10.3.1.1. Replacement of elements of a rack of a suspension bracket

Removal of elements

PERFORMANCE ORDER

1. Remove a suspension bracket rack.
2. Clamp a suspension bracket rack in a vice.
	3. Install compressors on a spring and squeeze it.
	4. Turn off a nut of fastening of a rod of the shock-absorber.
	5. Remove the top fastening of a rack. Check a condition of the bearing.
	6. Remove a saddle of a spring and a spring.
7. Remove a saddle and laying from a spring.
8. Remove a cover from the shock-absorber.
9. Examine laying on the lower saddle on existence of wear or damages.

Assembly of elements

PERFORMANCE ORDER

1. Replace laying on the lower saddle of a spring if it is necessary. Establish cover on the shock-absorber.
	2. Establish a spring on a suspension bracket rack.
	3. Establish laying and the top saddle of a spring.
4. Establish consolidation and the top fastening of a rack.
5. Tighten a fixing nut of a rod of the shock-absorber till the required moment inhalings.
6. Install a suspension bracket rack on the car.

home