Mazda 626

1991-1998 of release

Repair and operation of the car

Mazda 626

+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Technical characteristics
   2.2. Schedule of maintenance of Ford Probe, Mazdas 626 and MX-6
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of steering
   2.7. Check of level of automatic transmission liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Check of seat belts
   2.10. Survey and replacement of brushes of screen wipers
   2.11. Check, maintenance and accumulator charging
   2.12. Check, adjustment of a tension and replacement of a driving belt
   2.13. Check and replacement of hoses in a motive compartment
   2.14. Check of the cooling system
   2.15. Shift of wheels
   2.16. Check of the brake system
   2.17. Check of level of oil of the mechanical transmission
   2.18. Replacement of the air filter
   2.19. Check and replacement of spark plugs
   2.20. Check and replacement of elements of system of ignition
   2.21. Check and replacement of the valve of ventilation of a case
   2.22. Check and adjustment of speed of idling (model till 1997)
   2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997)
   2.24. Replacement of cooling liquid and washing of the cooling system
   2.25. Replacement of brake fluid
   2.26. Check of steering and suspension bracket
   2.27. Automatic transmission liquid replacement
   2.28. Replacement of oil of the mechanical transmission
   2.29. Check of the exhaust system
   2.30. Check of a power supply system
   2.31. Check and adjustment of gaps of valves (model of 1998 of release)
   2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips

2.19. Check and replacement of spark plugs

GENERAL INFORMATION

Prevention

When replacing spark plugs it is recommended to check wires of high voltage also.

Tools necessary for replacement of spark plugs

1. Deep nozzle

2. Dynamometer key

3. Treshchotochny key

4. Extender

5. Wire sensor

PERFORMANCE ORDER

1. Prepare necessary tools for replacement of spark plugs.
	2. By means of the wire sensor check a spark gap of new spark plugs.
	3. Adjust a gap if it is necessary, having turned in a side electrode.
	4. Disconnect wires from spark plugs. By means of compressed air clear area around spark plugs and unscrew candles, using a deep nozzle and the extender.
	5. Before installation of new spark plugs grease their carving with anticorrosive structure.
	6. Twirl candles into place, using a piece of a rubber hose as the universal hinge not to damage a carving. Tighten candles till the required inhaling moment.
7. Connect wires of high voltage.

home