Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Technical characteristics
   2.2. Schedule of maintenance of Ford Probe, Mazdas 626 and MX-6
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of steering
   2.7. Check of level of automatic transmission liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Check of seat belts
   2.10. Survey and replacement of brushes of screen wipers
   2.11. Check, maintenance and accumulator charging
   2.12. Check, adjustment of a tension and replacement of a driving belt
   2.13. Check and replacement of hoses in a motive compartment
   2.14. Check of the cooling system
   2.15. Shift of wheels
   2.16. Check of the brake system
   2.17. Check of level of oil of the mechanical transmission
   2.18. Replacement of the air filter
   2.19. Check and replacement of spark plugs
   2.20. Check and replacement of elements of system of ignition
   2.21. Check and replacement of the valve of ventilation of a case
   2.22. Check and adjustment of speed of idling (model till 1997)
   2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997)
   2.24. Replacement of cooling liquid and washing of the cooling system
   2.25. Replacement of brake fluid
   2.26. Check of steering and suspension bracket
   2.27. Automatic transmission liquid replacement
   2.28. Replacement of oil of the mechanical transmission
   2.29. Check of the exhaust system
   2.30. Check of a power supply system
   2.31. Check and adjustment of gaps of valves (model of 1998 of release)
   2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



2.12. Check, adjustment of a tension and replacement of a driving belt

GENERAL INFORMATION

Degree of wear of driving belts


1. Admissible wear

2. Cross cracks on belt edges

3. Unacceptable wear

4. There are no adjacent sites of edges of a belt more than 1 cm long

5. Cracks parallel to belt edges

Check

PERFORMANCE ORDER
1. Examine a driving belt on all length on both sides on existence of cracks or wear tracks.
2. Check a tension of a driving belt, having pressed on a belt in the middle between two pulleys, and measure a deviation of a belt (1) by means of a range (4). Check that the ruler was perpendicular (2) lath (3).

Adjustment of a tension

PERFORMANCE ORDER
1. For adjustment of a tension of a driving belt of the pump of system of hydrostrengthening of steering and the compressor of the conditioner on models with the four-cylinder engine turn off a coupling bolt of the pump and a lock bolt, then tighten up an adjusting bolt, weakening or strengthening a belt tension.
2. On models with the four-cylinder engine for adjustment of a tension of a driving belt of the water pump and the generator weaken fixing bolts of the generator and tighten up an adjusting nut.
3. On models with the six-cylinder engine for adjustment of a tension of a driving belt of the pump of system of hydrostrengthening of steering and the compressor of the conditioner weaken the top nut of a natyazhitel and tighten up an adjusting bolt (it is specified by an arrow).
4. On models with the six-cylinder engine for adjustment of a tension of a driving belt of the water pump and the generator weaken the lower nut (1) of a natyazhitel and tighten up an adjusting bolt (2).

Replacement

PERFORMANCE ORDER
1. Weaken a tension of a driving belt and remove it from pulleys.
2. If one belt demands replacement, it is recommended to replace other belts also. The chart of installation of belts is usually provided on the plate located in a motive compartment or on a cowl.
3. Installation of a new belt is carried out upside-down removals.