Mazda 626

1991-1998 of release

Repair and operation of the car


Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
- 12. Electric equipment
   12.1. Introduction
   12.2. Search of a source of malfunction in system of electric equipment
   12.3. Safety locks
   12.4. Automatic switches
   12.5. Relay
   12.6. Breaker of indexes of turns / alarm system
   12.7. Switches on a steering column
   12.8. Switch of ignition and drum of the lock
   12.9. Switches on the dashboard
   12:10. Tools of an instrument guard
   12:11. Instrument guard
   12:12. Radio receiver and loudspeakers
   12:13. Antenna
   12:14. Bulbs of headlights of head light
   12:15. Headlights of head light
   12:16. Drive of headlights of head light
   12:17. Replacement of bulbs
   12:18. Engine of screen wipers
   12:19. Horn of a sound signal
   12:20. System of day inclusion of headlights
   12:21. Heater of back glass
   12:22. System cruise control
   12:23. Power windows
   12:24. Central lock and remote control of the central lock
   12:25. A rear-view mirror with the electric drive
   12:26. Top hatch
   12:27. Safety airbag
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



12.9. Switches on the dashboard
GENERAL INFORMATION

Identification of plugs of the switch of a heater of back glass of the Mazda models
 At inclusion between plugs B and C there has to be a conductivity.

Identification of plugs of the switch of a heater of back glass of the Ford Probe models
 Give accumulator tension on plugs 3 (+) and 5 (-), when pressing the switch button at the plug 4 there has to be accumulator tension.

Identification of plugs of the switch of fog lamps of the Ford Probe models
At inclusion between plugs 4 and 5 there has to be a conductivity.

Identification of plugs of the switch of fog lamps of the Mazda models
At inclusion between plugs B and D there has to be a conductivity.

Identification of plugs of the switch of a screen wiper of back glass of the Ford Probe models
At inclusion between plugs A and B there has to be a conductivity.

Identification of plugs of the switch of windscreen washer of back glass of the Ford Probe models
At inclusion between plugs A and B there has to be a conductivity.

Identification of plugs of the switch of the drive of headlights of head light
 At inclusion between plugs C and D there has to be a conductivity, at switching off conductivity has to be between plugs C and E.

Regulator of brightness of bulbs of illumination of an instrument guard

Check and replacement
PERFORMANCE ORDER
1. Check operation of the regulator. Check connecting wires and giving of tension for the regulator. Replace the regulator if it is necessary.
2. Remove the panel of finishing and remove the regulator from the panel.


Switch of system of the alarm system (Mazda model)

Check and replacement
PERFORMANCE ORDER
1. Remove the switch and check its work: between plugs A and B there has to be a conductivity when the switch is in situation On.
2. Remove the finishing panel, disconnect the socket of connection and remove the switch.

Switches of a heater of back glass, fog lights, screen wiper / washer of back glass and drive of headlights of head light

Check and replacement
PERFORMANCE ORDER
1. Remove the switch and check it for conductivity (see above).
2. Remove the corresponding panel of finishing (switches fasten on a reverse side). Disconnect the socket of connection of the switch, release fixing clips and remove the switch.