Mazda 626
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
- 12. Electric equipment
12.1. Introduction
12.2. Search of a source of malfunction in system of electric equipment
12.3. Safety locks
12.4. Automatic switches
12.5. Relay
12.6. Breaker of indexes of turns / alarm system
12.7. Switches on a steering column
12.8. Switch of ignition and drum of the lock
12.9. Switches on the dashboard
12:10. Tools of an instrument guard
12:11. Instrument guard
12:12. Radio receiver and loudspeakers
12:13. Antenna
12:14. Bulbs of headlights of head light
12:15. Headlights of head light
12:16. Drive of headlights of head light
12:17. Replacement of bulbs
12:18. Engine of screen wipers
12:19. Horn of a sound signal
12:20. System of day inclusion of headlights
12:21. Heater of back glass
12:22. System cruise control
12:23. Power windows
12:24. Central lock and remote control of the central lock
12:25. A rear-view mirror with the electric drive
12:26. Top hatch
12:27. Safety airbag
+ 13. Electrical circuitries
+ 14. Useful tips
|
Forward indexes turns / front position lamps
| PERFORMANCE ORDER |
| 1. On the Ford Probe models turn off fixing screws and unbend edge of an insert of a wheel niche for access to a bulb. |
|
2. On the Ford Probe models turn counterclockwise and remove a cartridge with a bulb of the index of turns (A) and a front position lamp (In). |
|
3. On the Mazda models turn off a fixing bolt (it is specified by an arrow) and remove the index of turns. Turn a cartridge with a bulb and get it from a headlight. |
| 4. Replace a bulb. |
| 5. Installation is carried out upside-down removals. |
|
Back indexes of turns, fires of a stoplight and marker lights
| PERFORMANCE ORDER |
| 1. Open a luggage carrier cover / a back door. |
|
|
| 2. On the Probe models turn off the top fixing screw (a photo at the left) and remove a block headlight (a photo on the right). |
| |
3. On the Mazda models unbend the panel of finishing and turn off fixing screws of the holder of bulbs. |
| 4. Turn a cartridge with a bulb counterclockwise and get a cartridge. Replace a bulb. |
| 5. Installation is carried out upside-down removals. |
|
Top lamp of a stoplight
| PERFORMANCE ORDER |
| 1. Open a back door / trunk lid. |
|
2. On the Probe models remove side panels of finishing, then remove a plastic pin (it is specified by an arrow) and remove the central panel. |
|
3. Get cartridges with bulbs (are specified by shooters) |
|
4. On the Mazda models wring out a plastic latch (it is specified by an arrow) and remove a lamp casing. |
| 5. Get a cartridge and replace a bulb. |
| 6. Installation is carried out upside-down removals. |
|
Bulbs of illumination of registration plate
| PERFORMANCE ORDER |
|
|
1. Remove two lamps of illumination of registration plate. |
| 2. Replace bulbs. |
|
Bulbs of illumination of salon
| PERFORMANCE ORDER |
|
1. Remove lenses for access to bulbs (are specified by shooters). |
|
2. Remove the lens for access to a bulb (it is specified by an arrow). |
|
|
3. Turn off the fixing screw (it is specified by an arrow) and remove the lens. |
|
4. Remove the lens. |
| 5. Replace bulbs. |
|
Bulbs of illumination of an instrument guard
| PERFORMANCE ORDER |
| 1. Remove an instrument guard. |
|
2. Turn a cartridge with a bulb counterclockwise and remove it from an instrument guard. |
| 3. Replace a bulb. |
| 4. Installation is carried out upside-down removals. |
|
|
|
