Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
- 12. Electric equipment
   12.1. Introduction
   12.2. Search of a source of malfunction in system of electric equipment
   12.3. Safety locks
   12.4. Automatic switches
   12.5. Relay
   12.6. Breaker of indexes of turns / alarm system
   12.7. Switches on a steering column
   12.8. Switch of ignition and drum of the lock
   12.9. Switches on the dashboard
   12:10. Tools of an instrument guard
   12:11. Instrument guard
   12:12. Radio receiver and loudspeakers
   12:13. Antenna
   12:14. Bulbs of headlights of head light
   12:15. Headlights of head light
   12:16. Drive of headlights of head light
   12:17. Replacement of bulbs
   12:18. Engine of screen wipers
   12:19. Horn of a sound signal
   12:20. System of day inclusion of headlights
   12:21. Heater of back glass
   12:22. System cruise control
   12:23. Power windows
   12:24. Central lock and remote control of the central lock
   12:25. A rear-view mirror with the electric drive
   12:26. Top hatch
   12:27. Safety airbag
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



12:18. Engine of screen wipers

Check

PERFORMANCE ORDER
1. Check a safety lock of screen wipers. Check giving of tension for the engine of screen wipers.
2. Check operation of the engine of screen wipers, and also wires and connections. When giving tension of the accumulator on the plug About the engine has to work with small speed, when giving tension on the plug A the engine has to work with high speed.

Replacement

PERFORMANCE ORDER
1. Turn off a fixing nut and remove levers of screen wipers.
2. Remove the finishing panel before a windshield. Disconnect draft of the connecting mechanism (it is specified by an arrow) from the engine.
3. Turn off fixing bolts (are specified by shooters) and remove the engine.
4. Disconnect the socket of connection (A) and turn off fixing bolts (V) of the engine of a screen wiper of back glass.
5. Installation is carried out upside-down removals.