Mazda 626

1991-1998 of release

Repair and operation of the car

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
- 12. Electric equipment
   12.1. Introduction
   12.2. Search of a source of malfunction in system of electric equipment
   12.3. Safety locks
   12.4. Automatic switches
   12.5. Relay
   12.6. Breaker of indexes of turns / alarm system
   12.7. Switches on a steering column
   12.8. Switch of ignition and drum of the lock
   12.9. Switches on the dashboard
   12:10. Tools of an instrument guard
   12:11. Instrument guard
   12:12. Radio receiver and loudspeakers
   12:13. Antenna
   12:14. Bulbs of headlights of head light
   12:15. Headlights of head light
   12:16. Drive of headlights of head light
   12:17. Replacement of bulbs
   12:18. Engine of screen wipers
   12:19. Horn of a sound signal
   12:20. System of day inclusion of headlights
   12:21. Heater of back glass
   12:22. System cruise control
   12:23. Power windows
   12:24. Central lock and remote control of the central lock
   12:25. A rear-view mirror with the electric drive
   12:26. Top hatch
   12:27. Safety airbag
+ 13. Electrical circuitries
+ 14. Useful tips

12:12. Radio receiver and loudspeakers

Removal and installation

PERFORMANCE ORDER

Radio receiver
1. Disconnect a wire of the minus plug of the accumulator.
2. Remove the corresponding panel of finishing.
	3. Insert special tools into openings on the panel of the radio receiver and remove the receiver.
4. Disconnect the socket of connection and a wire of the antenna.
5. Installation is carried out upside-down removals.
Equalizer
6. Remove the central panel of finishing.
	7. Disconnect the connection socket, turn off fixing screws (are specified by shooters) and remove an equalizer.
Forward loudspeakers
8. Remove the panel of finishing of a forward door.
	9. Turn off fixing bolts (are specified by shooters), disconnect the socket of connection and remove the loudspeaker.
10. Installation is carried out upside-down removals.
Back loudspeakers
11. Remove finishing panels from back racks of a body on the Ford Probe models. On the Mazda models remove decorative lattices.
12. Turn off fixing screws, disconnect the socket of connection and remove the loudspeaker.
13. Installation is carried out upside-down removals.
High-frequency loudspeakers
14. Remove the loudspeaker from the dashboard and disconnect the connection socket.
15. Installation is carried out upside-down removals.

home