Mazda 626

1991-1998 of release

Repair and operation of the car


Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
- 12. Electric equipment
   12.1. Introduction
   12.2. Search of a source of malfunction in system of electric equipment
   12.3. Safety locks
   12.4. Automatic switches
   12.5. Relay
   12.6. Breaker of indexes of turns / alarm system
   12.7. Switches on a steering column
   12.8. Switch of ignition and drum of the lock
   12.9. Switches on the dashboard
   12:10. Tools of an instrument guard
   12:11. Instrument guard
   12:12. Radio receiver and loudspeakers
   12:13. Antenna
   12:14. Bulbs of headlights of head light
   12:15. Headlights of head light
   12:16. Drive of headlights of head light
   12:17. Replacement of bulbs
   12:18. Engine of screen wipers
   12:19. Horn of a sound signal
   12:20. System of day inclusion of headlights
   12:21. Heater of back glass
   12:22. System cruise control
   12:23. Power windows
   12:24. Central lock and remote control of the central lock
   12:25. A rear-view mirror with the electric drive
   12:26. Top hatch
   12:27. Safety airbag
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



12.7. Switches on a steering column
GENERAL INFORMATION

Identification of plugs of switches – models till 1997 of release

The table of conductivity of switches on a steering column – models till 1997 of release

The combined switch
Position of the switch
Conductivity between plugs
Headlights of head light
3 and 8
Front position lamps
2 and 3
Passing beam of headlights
15 and 19
Driving beam of headlights
19 and 17
Blinking of headlights
17 and 18
Left indexes of turns
9 and 16
Right indexes of turns
9 and 20
Alarm system
6 and 14
Switch of screen wipers / washers:
  – it is switched off
4 and 13
  – low speed
11 and 13
  – high speed
11 and 12
  – work of screen wipers with pauses
11 and 12
  – windscreen washers
5 and 11

Identification of plugs of the combined switch – model of 1998 of release

Identification of plugs of the switch of screen wipers / washers – models of 1998 of release

The table of conductivity of the combined switch – model of 1998 of release

Position of the switch
Conductivity between plugs
Headlights of head light
9,10 and 11
Front position lamps
10 and 11
Passing beam of headlights
2 and 6; 7 and 8
Driving beam of headlights
2 and 5; 3 and 7
Blinking of headlights
9 and 11
Left indexes of turns
12 and 14
Right indexes of turns
12 and 13
Alarm system
6 and 14

The table of conductivity of the switch of screen wipers / washers – models of 1998 of release

Position of the switch
Conductivity between plugs
It is switched off
3 and 5
Low speed
3 and 6
High speed
4 and 6
Work of screen wipers with pauses
4 and 6
Windscreen washers
1 and 6

Check

PERFORMANCE ORDER
1. Remove the lower casing of a steering column and disconnect 6-shtyrkovy and 14-shtyrkovy sockets of connection.
2. Check existence of conductivity between switch plugs, being guided by the provided tables rice. The table of conductivity of switches on a steering column – models till 1997 of release, the Table of conductivity of the combined switch – model of 1998 of release, the Table of conductivity of the switch of screen wipers / washers – models of 1998 of release.

Replacement

PERFORMANCE ORDER
Models till 1997 of release
1. Disconnect a wire of the minus plug of the accumulator.
2. Remove a steering wheel and casings of a steering column.
3. Remove a screw spring.
4. Turn off fixing screws (are specified by shooters), disconnect sockets of connection and remove the switch.
5. Installation is carried out upside-down removals.
Models of 1998 of release
6. Remove casings of a steering column.
7. Disconnect the connection socket, turn off fixing screws and remove the switch.
8. Installation is carried out upside-down removals.

On the homepage