Mazda 626
1991-1998 of release
Repair and operation of the car
Mazda 626
+
1. Maintenance instruction
+
2. Maintenance
+
3. Engines
+
4. Heating and ventilation
+
5. Fuel system
-
6. Exhaust system
+
6.1. Exhaust system
-
6.2. Systems of decrease in toxicity of exhausts and management of operation of the engine
6.2.1. Introduction
6.2.2. System of self-diagnostics and codes of malfunction
6.2.3. Central control unit
6.2.4. Sensor of provision of a butterfly valve
6.2.5. Air stream sensor
6.2.6. The sensor of temperature of the arriving air
6.2.7. Sensor of temperature of cooling liquid
6.2.8. Sensor of provision of a bent shaft
6.2.9. Sensor of position of the camshaft
6.2.10. Switch of system of hydrostrengthening of steering
6.2.11. Oxygen sensor
6.2.12. Sensor of detonation combustion of fuel
6.2.13. Speed sensor
6.2.14. Air valve
6.2.15. System of additional air supply on low turns
6.2.16. System of ventilation of a case
6.2.17. System of recirculation of exhaust gases
6.2.18. System of collecting vapors of fuel
6.2.19. Switch of fires of a stoplight
6.2.20. Catalytic converter
+
7. Transmissions
+
8. Coupling and half shafts
+
9. Brake system
+
10. Running gear
+
11. Body
+
12. Electric equipment
+
13. Electrical circuitries
+
14. Useful tips
6.2.19. Switch of fires of a stoplight
Check
PERFORMANCE ORDER
1.
Check giving of tension for the switch.
2.
By means of an ohmmeter check that the switch closed and disconnected a chain.
Replacement
PERFORMANCE ORDER
1.
Remove the finishing panel from below of the dashboard.
2.
Disconnect the socket of connection of the switch, turn the switch on 1/4 turns and remove it from a fixing arm.
3.
Installation is carried out upside-down removals.
home
