Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Heating and ventilation
   4.1. Introduction
   4.2. Technical characteristics
   4.3. Thermostat
   4.4. The cooling fans
   4.5. Radiator and broad tank
   4.6. Water pump
   4.7. Sensor of temperature of cooling liquid
   4.8. Oil heater of the engine (6-cylinder models)
   4.9. Electric chain of the motor of the delivery fan
   4.10. Motor of the delivery fan
   4.11. Control unit of a heater and air conditioner
   4.12. Heater radiator
   - 4.13. Systems of air conditioning and heating
      4.13.1. Electric chain of coupling of the compressor of the air conditioner
      4.13.2. Moisture separator of the air conditioning system
      4.13.3. Compressor of the air conditioner
      4.13.4. Refrigerator of the air conditioning system
      4.13.5. Evaporator of the air conditioning system
      4.13.6. Broad nozzle of the air conditioning system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



4.13.4. Refrigerator of the air conditioning system

GENERAL INFORMATION

Arrangement of connections of tubes of coolant
Connections of tubes of coolant (shooter) are located in front of the refrigerator (Mazda 1997).

Arrangement of tubes of coolant
Coolant tubes (are specified by shooters) are attached to the top and lower parts of the refrigerator (Mazda 1998).

Removal
PERFORMANCE ORDER
1. Lower pressure in system.
2. Remove a radiator (Probe).
3. Remove arms of a radiator (Mazda).
4. Remove connection (it is specified by an arrow) tubes of coolant (Probe).
5. Unscrew bolts, twist nuts and remove the refrigerator.

Installation

Installation is carried out upside-down removals.


On the homepage