|
|
Mazda 6261991-1998 of releaseRepair and operation of the car |
|
|
Mazda 626 + 1. Maintenance instruction + 2. Maintenance + 3. Engines - 4. Heating and ventilation 4.1. Introduction 4.2. Technical characteristics 4.3. Thermostat 4.4. The cooling fans 4.5. Radiator and broad tank 4.6. Water pump 4.7. Sensor of temperature of cooling liquid 4.8. Oil heater of the engine (6-cylinder models) 4.9. Electric chain of the motor of the delivery fan 4.10. Motor of the delivery fan 4.11. Control unit of a heater and air conditioner 4.12. Heater radiator - 4.13. Systems of air conditioning and heating 4.13.1. Electric chain of coupling of the compressor of the air conditioner 4.13.2. Moisture separator of the air conditioning system 4.13.3. Compressor of the air conditioner 4.13.4. Refrigerator of the air conditioning system 4.13.5. Evaporator of the air conditioning system 4.13.6. Broad nozzle of the air conditioning system + 5. Fuel system + 6. Exhaust system + 7. Transmissions + 8. Coupling and half shafts + 9. Brake system + 10. Running gear + 11. Body + 12. Electric equipment + 13. Electrical circuitries + 14. Useful tips 
|
4.13.1. Electric chain of coupling of the compressor of the air conditioner
Contacts of the relay of the compressor of the air conditioner
Press the button of the air conditioner and check as coupling of the compressor works. If coupling does not work, remove the switch of pressure of air conditioning system and close its contacts by a crossing point. If now coupling works, so pressure in system too low or too high and system needs to be examined in a specialized workshop. If coupling still does not work, check whether tension on coupling contacts moves. If tension moves, connect contact of coupling of the compressor directly to the plus plug of the accumulator. If coupling does not work, so it is faulty and is subject to replacement. If tension does not move on contacts of the compressor, check the corresponding safety locks. If safety locks as it should be, remove and check the compressor relay (see rice. Contacts of the relay of the compressor of the air conditioner). When the relay is removed, and ignition is included, on contacts of the 3 and 5 nest of the relay there has to be accumulator tension. Connect contacts by the 2 and 3 crossing point, and check whether coupling works. If it still does not work, so conducting in a compressor chain is punched. |
|