Mazda 626

1991-1998 of release

Repair and operation of the car

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Heating and ventilation
   4.1. Introduction
   4.2. Technical characteristics
   4.3. Thermostat
   4.4. The cooling fans
   4.5. Radiator and broad tank
   4.6. Water pump
   4.7. Sensor of temperature of cooling liquid
   4.8. Oil heater of the engine (6-cylinder models)
   4.9. Electric chain of the motor of the delivery fan
   4.10. Motor of the delivery fan
   4.11. Control unit of a heater and air conditioner
   4.12. Heater radiator
   + 4.13. Systems of air conditioning and heating
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips

4.8. Oil heater of the engine (6-cylinder models)

GENERAL INFORMATION

The oil heater is fixed between an oil filter and an adapter of an oil filter.

Removal and installation

PERFORMANCE ORDER

1. Remove an oil filter, and merge cooling liquid.

2. Unscrew a bolt of the heat-insulating guard (A) and disconnect two hoses of cooling liquid (V) from the oil heater.

3. Twist a nut of a radiator and remove a radiator.

4. Installation is carried out upside-down removals.

On the homepage