Mazda 626

1991-1998 of release

Repair and operation of the car


Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Heating and ventilation
   4.1. Introduction
   4.2. Technical characteristics
   4.3. Thermostat
   4.4. The cooling fans
   4.5. Radiator and broad tank
   4.6. Water pump
   4.7. Sensor of temperature of cooling liquid
   4.8. Oil heater of the engine (6-cylinder models)
   4.9. Electric chain of the motor of the delivery fan
   4.10. Motor of the delivery fan
   4.11. Control unit of a heater and air conditioner
   4.12. Heater radiator
   + 4.13. Systems of air conditioning and heating
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568
Поплавочна вудка


4.10. Motor of the delivery fan
GENERAL INFORMATION
Prevention

The models described in this manual are equipped with airbags. Before works surely disconnect system of airbags to avoid their sudden disclosure.

Removal and installation

PERFORMANCE ORDER
1. Remove the panel of internal finishing located under a ware box.
2. Disconnect wires from the motor, the resistor and the relay of high speed of the fan.
3. Unscrew three fixing screws of the motor.
4. Remove the motor.
5. Remove a clamp from a shaft of the motor and disconnect fan blades from the motor.
6. Installation is carried out upside-down removals.

On the homepage