Mazda 626
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
+ 3.1. Petrol engines (1,6 and 1,8 liters)
+ 3.2. Petrol 4-cylinder engine (2 liters)
+ 3.3. Petrol V6 engine (2,5 liters)
+ 3.4. Partition of engines (1,6 and 1,8 liters)
+ 3.5. Partition of engines (2,0 and 2,5 liters of V6)
+ 3.6. Diesel engine 2,0 liters
- 3.7. Systems of electric equipment of the engine
3.7.1. Introduction
3.7.2. Technical characteristics
3.7.3. Accumulator
+ 3.7.4. System of ignition
3.7.5. System of recharge of the accumulator
3.7.6. Generator
- 3.7.7. Starter and system of start of the engine
3.7.7.1. The involving starter relay
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips
|
Removal and installation
| PERFORMANCE ORDER |
| 1. Disconnect a wire of the minus plug of the accumulator. |
| 2. Remove a starter. |
|
|
| 3. Disconnect the thick wire connecting the relay and a starter. Turn off fixing screws (are specified by shooters) and remove the relay. |
| 4. Installation is carried out upside-down removals. |
|
|
|
