| Door lock |
| 1. Remove the panel of finishing of a door. |
| 2. Disconnect drafts and sockets of connection from the door lock. |
|
|
3. Turn off fixing screws (are specified by shooters) and remove the lock. |
| 4. Installation is carried out upside-down removals. |
| External handle of a door and drum of the lock |
| 5. Remove the panel of finishing of a door. |
|
|
6. Disconnect drafts and sockets of connection (A) from the lock, remove a fixing clip (V) of a drum of the lock, having shifted it in the direction of an arrow (C). |
|
7. On the Ford Probe models remove caps and turn off fixing nuts of the external handle. |
|
|
|
On the Mazda models turn off a fixing nut of the handle of a door (it is specified by an arrow), remove a cap and turn off the second nut. |
| 8. Remove a handle / drum of the lock from the car. |
| 9. Installation is carried out upside-down removals. |
