Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
- 9. Brake system
   9.1. Introduction
   9.2. Technical characteristics
   9.3. System of anti-blocking of brakes (ABS)
   9.4. Brake overlays of disk brakes
   9.5. Brake support
   9.6. Brake disk
   9.7. Brake shoes of drum brakes
   9.8. Wheel cylinder
   9.9. Main brake cylinder
   9.10. Brake tubes and hoses
   9.11. Pumping of the brake system
   9.12. Vacuum amplifier
   9.13. Height and free wheeling of a pedal of a brake
   9.14. Emergency brake
   9.15. Ropes of the emergency brake
   9.16. Switch of an alarm bulb of low level of brake fluid
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



9.5. Brake support

FORWARD WHEELS

Removal

PERFORMANCE ORDER
1. Remove a forward wheel.
2. Disconnect a brake hose from a support and close the end of a hose.
3. Turn off a fixing bolt of a support.
4. Lift a support and remove it from a support finger.

Installation

Installation is carried out upside-down removals.

BACK WHEELS

Removal

PERFORMANCE ORDER
1. Remove a back wheel.
2. Disconnect a rope of the emergency brake from a support.
3. Turn off a bolt of connection of a banjo and disconnect a brake hose. Close the end of a hose.
4. Turn off a fixing bolt and remove a support.

Installation

Installation is carried out upside-down removals.