Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
- 9. Brake system
   9.1. Introduction
   9.2. Technical characteristics
   9.3. System of anti-blocking of brakes (ABS)
   9.4. Brake overlays of disk brakes
   9.5. Brake support
   9.6. Brake disk
   9.7. Brake shoes of drum brakes
   9.8. Wheel cylinder
   9.9. Main brake cylinder
   9.10. Brake tubes and hoses
   9.11. Pumping of the brake system
   9.12. Vacuum amplifier
   9.13. Height and free wheeling of a pedal of a brake
   9.14. Emergency brake
   9.15. Ropes of the emergency brake
   9.16. Switch of an alarm bulb of low level of brake fluid
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



9.2. Technical characteristics

GENERAL INFORMATION

The general
Brake pedal
Height (to a carpet):
  – model 1993-1997 of years of release
156 – 161 mm
  – models of 1998 of release
175 – 0,5 mm
Free wheeling:
  – model 1993-1997 of years of release:
     • models with the mechanical transmission
4 – 8 mm
     • models with the automatic transmission
8 – 12 mm

  – models of 1998 of release

8 – 12 mm
Course of the lever of the emergency brake:
  – model 1993-1997 of years of release
5 – 7 clicks
  – models of 1998 of release
6 – 8 clicks
Gap between a pusher of the vacuum amplifier of the brake system and the piston of the main cylinder (at depression in the vacuum amplifier of 500 mm of a mercury column)
0,1 – 0,3 mm
Disk brakes:
Minimum thickness of brake slips
Minimum thickness of a brake disk
It is specified disk surfaces
Distinction in disk thickness
no more than 0,025 mm
The most admissible beating of a disk
0,1 mm

Drum brakes:

  – minimum admissible thickness of frictional material of brake shoes
  – maximum diameter of the brake drum
It is specified on a drum

Moments of an inhaling, N. of m.

The general
Bolt of connection of a banjo on a brake support
21 – 30
Fixing nuts of the main brake cylinder
11 – 16
Fixing nuts of an arm of the balance weight
19 – 25
Fixing nuts of the vacuum amplifier
19 – 25
Fixing bolts of the ABS wheel sensor
16 – 23
Forward disk brakes:
Fixing bolts of a support
45 – 49
Bolts of a fixing arm of a support
78 – 100

Fixing screws of a brake disk

10 – 13
Back disk brakes:
Fixing bolts of a support
34 – 39
Bolts of a fixing arm of a support
45 – 66