Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
- 9. Brake system
   9.1. Introduction
   9.2. Technical characteristics
   9.3. System of anti-blocking of brakes (ABS)
   9.4. Brake overlays of disk brakes
   9.5. Brake support
   9.6. Brake disk
   9.7. Brake shoes of drum brakes
   9.8. Wheel cylinder
   9.9. Main brake cylinder
   9.10. Brake tubes and hoses
   9.11. Pumping of the brake system
   9.12. Vacuum amplifier
   9.13. Height and free wheeling of a pedal of a brake
   9.14. Emergency brake
   9.15. Ropes of the emergency brake
   9.16. Switch of an alarm bulb of low level of brake fluid
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



9.15. Ropes of the emergency brake

Replacement

PERFORMANCE ORDER
1. On models with back drum brakes remove brake shoes. Squeeze fastening uvulas on a braid of a rope and stretch a rope through a brake guard. On models with back disk brakes disconnect a rope from a brake support.
2. Disconnect the forward end of a rope from the balance weight, squeeze uvulas of fastening and stretch a rope through an opening in a fixing arm.
3. Turn off fixing bolts of a braid of a rope and remove a rope.
4. Installation is carried out upside-down removals.