|
|
Mazda 6261991-1998 of releaseRepair and operation of the car |
|
|
Mazda 626 - 1. Maintenance instruction 1.1. Review of an interior 1.2. Review of the dashboard 1.3. Information plates of the car 1.4. Automatic inclusion of transfers 1.5. Councils for driving 1.6. Dashboard + 1.7. Warning sound / light signals, headlights 1.8. Screen wiper and washer of a windshield 1.9. Screen wiper and washer of back glass 1.10. Washer of headlights 1.11. Anti-icer of back glass 1.12. Flight computer 1.13. Display of external temperature 1.14. Hours 1.15. Types of the air conditioning system 1.16. Safety locks 1.17. Identification number of the car + 2. Maintenance + 3. Engines + 4. Heating and ventilation + 5. Fuel system + 6. Exhaust system + 7. Transmissions + 8. Coupling and half shafts + 9. Brake system + 10. Running gear + 11. Body + 12. Electric equipment + 13. Electrical circuitries + 14. Useful tips 
Горит лампочка абс причина |
1.14. Hours
Type A and B Installation of time The ignition key has to be in the family way of ACC (I) or ON (II). For installation of hour Press the button N (hours) for change of indications of hour. For installation of minutes Press the button M (minutes) for change of the indication of minutes. Type A
Type B
Press the RESET button (to dump) for dumping of minutes. Hours will be determined on the indication of hours. For example, if the RESET button was pressed in the period of time from 9:00 to 9:29, then time will be determined at 9:00. If it is pressed in the period of time from 9:30 to 9:59, then time will be determined at 10:00. 9:01 – 9:29 = 9:00 At power off time is automatically dumped at 1:00. Type C
Installation of time The ignition key has to be installed in position of ACC (I) or ON (II). Press the SET button (to establish) and hold it in the pressed state within about 2 seconds until the display of time does not begin to blink. Release the button. Then press the SET button repeatedly for installation of indications of minutes and hours. Upon completion of installation of time press the SELECT button (to choose) for start-up of hours. When time display on hours blinks, press the RESET button (to dump) for dumping of the indication. Hours will be determined on display of time in hours. If hours are dumped at indications on the display, for example, from 9:01 to 9:29, then time will be dumped at 9:00. If dumping happens from 9:30 till 9:59, time will be dumped at 10:00. At power off time is automatically dumped at 1:00. Type D
If the car is equipped with the audio system, then hours are built in this system. |
On the homepage
|