Mazda 626

1991-1998 of release

Repair and operation of the car



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
- 8. Coupling and half shafts
   8.1. Introduction
   8.2. Technical characteristics
   - 8.3. Coupling
      8.3.1. Coupling switching off drive cylinders
      8.3.2. Hydraulic system of the drive of switching off of coupling
      8.3.3. Coupling mechanism elements
      8.3.4. Release bearing and fork of the release bearing
      8.3.5. Adjustment of a pedal of coupling
      8.3.6. Blocking switch
   + 8.4. Half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



8.3.1. Coupling switching off drive cylinders

MAIN CYLINDER OF THE DRIVE OF SWITCHING OFF OF COUPLING

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Disconnect draft of the cylinder from a pedal of coupling and turn off a fixing nut under the dashboard.
3. Remove the coal filter.
4. Press and disconnect a hydraulic hose from the cylinder. Disconnect a hydraulic tube.
5. Turn off the remained fixing nut and remove the cylinder.

Installation

Installation is carried out upside-down removals.

WORKING CYLINDER OF THE DRIVE OF SWITCHING OFF OF COUPLING

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Disconnect a hydraulic tube from the cylinder, turn off fixing bolts and remove the cylinder.

Installation

Installation is carried out upside-down removals.

On the homepage