Mazda 626

1991-1998 of release

Repair and operation of the car

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
- 7. Transmissions
   + 7.1. Mechanical transmission
   - 7.2. Automatic transmission
      7.2.1. Introduction
      7.2.2. Technical characteristics
      7.2.3. Diagnostics
      7.2.4. Gear shifting lever
      7.2.5. Gear shifting rope
      7.2.6. System of mutual blocking
      7.2.7. Transmission sensor
      7.2.8. Epiploons of the leading axes
      7.2.9. Removal and automatic transmission installation
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips

7.2.5. Gear shifting rope

Removal

PERFORMANCE ORDER

1. Remove the central console.
2. Remove the delivery fan of a heating system.
	3. Unscrew four screws of the indicator of position of the lever of gear shifting and remove the indicator.
	4. Disconnect a gear shifting rope from the gear shifting lever.
5. Squeeze pads of a latch and disconnect a rope from a gear shifting lever casing.
6. Remove a casing of the air filter.
	7. Remove a cap of a clamp (A) and disconnect a rope from the switching lever (V) on the transmission.
8. Disconnect a rope from the transmission.
	9. Twist two nuts fixing the insulating plug of a rope to a dividing partition of a motive compartment.

Installation

Installation of a rope is carried out upside-down removals.

Adjustment

PERFORMANCE ORDER

1. Install the gear shifting lever in parking situation (PARK).
2. Remove the panel of the indicator of position of the lever.
	3. Remove a clamp (A) and wring out the adjusting button (B).
4. Install the switching lever on the transmission in parking situation and fix the gear shifting lever, having pressed the adjusting button.
5. Put on a clamp of the adjusting button.
6. Establish the remained details and check how the gear shifting lever works.

home