Mazda 626

1991-1998 of release

Repair and operation of the car


Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
- 5. Fuel system
   + 5.1. Nikki 30/34 carburetor
   + 5.2. Power supply system (l engines 1,6 and 1,8)
   - 5.3. Power supply system (l engines 2,0 and 2,5)
      5.3.1. Introduction
      5.3.2. Technical characteristics
      5.3.3. Dumping of pressure in fuel system
      5.3.4. Fuel pump and fuel pressure
      5.3.5. Fuel tubes and connections of tubes
      5.3.6. Fuel level measuring instrument sensor
      5.3.7. Fuel tank
      5.3.8. Casing of the air filter
      5.3.9. Accelerator rope
      5.3.10. Electronic system of injection of fuel
      5.3.11. Casing of a butterfly valve
      5.3.12. Fuel pressure regulator
      5.3.13. Fuel highway and injectors
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



5.3.9. Accelerator rope

Replacement

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Disconnect a rope from the lever of a butterfly valve.
3. Disconnect a rope from an arm.
4. Disconnect a rope from the accelerator pedal lever.
5. Remove a rope.
6. Installation is carried out upside-down removals.

Adjustment

PERFORMANCE ORDER
Measure a free wheeling of a pedal, it should not exceed 2–5 mm. Press on the button (A) and weaken a rope clamp (In). Adjust a free wheeling of a pedal and again record a rope.

On the homepage