| 1. Disconnect a wire of the minus plug of the accumulator. |
| 2. Remove the airintaking pipe connecting the throttle case to the air filter. |
| 3. Disconnect a wire of the sensor of provision of a butterfly valve. Disconnect vacuum hoses from the throttle case. |
| 4. Disconnect a rope of an accelerator and a rope of system a control cruise. |
| 5. Disconnect hoses of cooling liquid from a throttle casing. |
|
|
6. Twist four nuts and remove a casing of a throttle and laying. |
| 7. Installation is carried out upside-down removals. |
