| 1. Release pressure from a power supply system. |
|
2. Remove back sitting and turn off fixing screws (are specified by shooters) and remove a casing. |
|
|
| 3. Disconnect the socket of connection of the pump (at the left), turn off a nut and disconnect a wire from above of the pump (on the right). |
|
4. Disconnect a fuel supply hose (it is specified by the right arrow) and a hose of the return pipeline (it is specified by the left arrow). |
|
|
| 5. Turn off fixing screws (at the left) and remove the pump (on the right). |
|
6. Disconnect the socket of connection and remove a collar. |
| 7. Remove the pump from an arm. |
|
8. Installation is carried out upside-down removals. Replace a sealing ring. |
