Mazda 626
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
- 5. Fuel system
+ 5.1. Nikki 30/34 carburetor
- 5.2. Power supply system (l engines 1,6 and 1,8)
5.2.1. Introduction
5.2.2. Technical characteristics
5.2.3. Release of pressure from a power supply system
5.2.4. The fuel pump/pressure in a power supply system
5.2.5. Fuel tubes and connections
5.2.6. Removal and installation of the fuel pump
5.2.7. Fuel level sensor
5.2.8. Fuel tank
5.2.9. Air filter
5.2.10. Accelerator rope
+ 5.2.11. System of electronic injection of fuel
+ 5.3. Power supply system (l engines 2,0 and 2,5)
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips
|
Removal
| PERFORMANCE ORDER |
|
1. Turn off lock-nuts on an accelerator rope. |
|
2. Turn the lever of a butterfly valve and disconnect a rope. |
| 3. Stretch a rope in a motive compartment and remove it from the car. |
|
Installation and adjustment
| PERFORMANCE ORDER |
| 1. Installation is carried out upside-down removals. |
| 2. Check that the rope completely opened a butterfly valve when pressing an accelerator pedal. Check a free wheeling of a rope. |
| 3. For adjustment of a rope weaken lock-nuts and adjust a rope. |
|
|
On the homepage
|
