Mazda 626

1991-1998 of release

Repair and operation of the car

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
- 10. Running gear
   10.1. Introduction
   10.2. Technical characteristics
   + 10.3. Suspension brackets
   - 10.4. Steering
      10.4.1. Steering wheel
      10.4.2. Steering column
      10.4.3. Tips of steering drafts
      10.4.4. Replacement of covers of the steering mechanism
      10.4.5. Steering mechanism
      10.4.6. Pump of system of hydrostrengthening of steering
      10.4.7. Pumping of system of hydrostrengthening of steering
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips

10.4.6. Pump of system of hydrostrengthening of steering

Removal

PERFORMANCE ORDER

1. Disconnect a wire of the minus plug of the accumulator.
2. Pump out liquid from a tank of system of hydrostrengthening of steering. Install the pallet under the engine for collecting hydraulic liquid.
Models with the four-cylinder engine
3. Remove the filter of a driving belt of the pump.
4. Turn off a fixing bolt of a pulley of the pump.
5. Turn off a lock and adjusting bolt and take off a driving belt.
	6. Disconnect a tube of supply of hydraulic liquid (A) and a tube of high pressure (V) from the pump of system of hydrostrengthening of steering (model with the 4-cylinder engine).
7. Disconnect the socket of connection of the switch of system of hydrostrengthening of steering.
8. Turn off fixing bolts and remove the pump.
Models with the six-cylinder engine
	9. Disconnect a tube of supply of hydraulic liquid (A) and a tube of high pressure (V) from the pump of system of hydrostrengthening of steering (model with the 6-cylinder engine).
10. Remove the right forward wheel and a protective guard of the engine.
11. Turn off a fixing bolt of a pulley of the pump.
12. Turn off a lock and adjusting bolt and take off a driving belt.
13. Disconnect a tube of supply of hydraulic liquid.
14. Disconnect the socket of connection of the switch of system of hydrostrengthening of steering.
	15. Remove an adjusting arm, turn off fixing bolts and remove the pump.

Installation

Installation is carried out upside-down removals.

On the homepage