Mazda 626

1991-1998 of release

Repair and operation of the car

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
- 10. Running gear
   10.1. Introduction
   10.2. Technical characteristics
   + 10.3. Suspension brackets
   - 10.4. Steering
      10.4.1. Steering wheel
      10.4.2. Steering column
      10.4.3. Tips of steering drafts
      10.4.4. Replacement of covers of the steering mechanism
      10.4.5. Steering mechanism
      10.4.6. Pump of system of hydrostrengthening of steering
      10.4.7. Pumping of system of hydrostrengthening of steering
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips

10.4.2. Steering column

Removal

PERFORMANCE ORDER

1. Remove a steering wheel.
	2. Turn off fixing screws of a screw spring.
	3. Turn off the screw of connection of a wire of "weight".
4. Disconnect a wire of "weight" and remove a spring.
5. Remove the combined switch.
6. Remove a rope of opening of a cowl from the lower section of the dashboard.
7. Remove the lower section of the dashboard.
8. On models with the automatic transmission disconnect a transfer switching blocking rope.
	9. Turn off a coupling bolt of the hinge of an intermediate shaft of a steering column (it is specified by an arrow).
	10. Turn off fixing bolts and nuts of a steering column (are specified by shooters).
	11. Disconnect connection sockets (are specified by tsrelka).
12. Remove a steering column.

Installation

Installation is carried out upside-down removals.

home