Mazda 626

1991-1998 of release

Repair and operation of the car

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
- 10. Running gear
   10.1. Introduction
   10.2. Technical characteristics
   - 10.3. Suspension brackets
      + 10.3.1. Rack of a forward suspension bracket
      - 10.3.2. Rack of a back suspension bracket
         10.3.2.1. Arm of a nave of a back wheel
         10.3.2.2. Nave and hug bearing of a back wheel
         10.3.2.3. Stabilizer of cross stability of a back suspension bracket
         10.3.2.4. Lever of a back suspension bracket
      10.3.3. Size of tires
      10.3.4. Angles of installation of wheels
   + 10.4. Steering
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips

10.3.2.3. Stabilizer of cross stability of a back suspension bracket

Removal and installation

PERFORMANCE ORDER

1. Remove back wheels.
	2. Turn off fixing nuts and disconnect connecting drafts from a bar of the stabilizer of cross stability.
	3. Turn off fixing bolts and remove the stabilizer of cross stability (one of bolts is specified by an arrow).
4. Check a condition of plugs of fastenings and spherical hinges of connecting drafts. Replace worn-out elements.
5. Installation is carried out upside-down removals.

home