Mazda 626

1991-1998 of release

Repair and operation of the car

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
- 8. Coupling and half shafts
   8.1. Introduction
   8.2. Technical characteristics
   + 8.3. Coupling
   - 8.4. Half shafts
      8.4.1. Intermediate shaft
      8.4.2. Boots of half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips

8.4.1. Intermediate shaft

Removal

PERFORMANCE ORDER

1. Disconnect the internal end of the right half shaft from an intermediate shaft.
	2. Turn off fixing bolts of fastening of the intermediate bearing; the inhaling of bolts needs to be carried out in that order.
	3. Get the internal end of an intermediate shaft from the transmission.
4. Check a condition of the intermediate bearing.

Installation

PERFORMANCE ORDER

Installation is carried out upside-down removals. Grease vents and epiploons with multi-purpose grease before installation. Replace a lock ring on the end of an intermediate shaft.

home