Mazda 626

1991-1998 of release

Repair and operation of the car


Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
- 7. Transmissions
   - 7.1. Mechanical transmission
      7.1.1. Introduction
      7.1.2. Technical characteristics
      7.1.3. Lever, casing of the lever and mechanism of gear shifting
      7.1.4. Switch of fires of lamps of a backing
      7.1.5. Removal and MKPP installation
   + 7.2. Automatic transmission
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electrical circuitries
+ 14. Useful tips


4295d568



7.1.3. Lever, casing of the lever and mechanism of gear shifting
GENERAL INFORMATION
Prevention

The models described in this manual are equipped with airbags. Before works surely disconnect system of airbags to avoid their sudden disclosure.

Gear shifting lever

PERFORMANCE ORDER
1. Remove the lever handle.
2. Remove the central console.
3. Remove a gear shifting lever cover.
4. Remove a cover from the lower part of the lever of gear shifting.
5. Remove the soundproofing laying.
6. Remove a steel lock ring.
7. Remove a sealing ring and the top emphasis.
8. Lift and fix a forward part of the car.
9. Twist nuts of a flange of the catalytic converter.
10. Remove suspended arms of final system.
11. Unscrew screws and remove the heatreflecting muffler guard.
12. Unscrew a bolt of the switching rod of the transmission and remove the gear shifting lever.
13. Installation is carried out upside-down removals.

GEAR SHIFTING LEVER CASING

PERFORMANCE ORDER
1. Remove the gear shifting lever from a casing.
2. Twist four nuts of a casing of the lever of gear shifting.
3. Unscrew a through bolt of the extending core and remove a gear shifting lever casing.
4. Installation is carried out upside-down removals.

THE SWITCHING DRAFT

PERFORMANCE ORDER
1. Remove the gear shifting lever from a casing.
2. Disconnect the switching draft and the extending core from the transmission.
3. Installation is carried out upside-down removals.